Hoverboard Only Goes in Circles: Causes, Fixes, and Prevention Tips

Ever hopped on your hoverboard, only to find it stubbornly spinning in circles like a broken record? It's frustrating, confusing, and downright dangerous. But don't worry—you're not alone. This common issue has plagued hoverboard riders for years, and the good news is that it's often fixable. Let's dive into the reasons behind this annoying problem and how you can get your hoverboard moving straight again.

Why Does My Hoverboard Only Go in Circles?

When your hoverboard starts moving in circles uncontrollably, it's usually due to one of these reasons:

• Calibration Issues: The most common culprit. If the sensors or gyroscopes are misaligned, your hoverboard won't balance properly.
• Uneven Tire Pressure: If one tire is underinflated, it can cause the hoverboard to pull to one side.
• Faulty Gyroscope: A malfunctioning gyroscope can send incorrect signals, making the hoverboard spin.
• Motor Problems: If one motor is weaker than the other, the hoverboard will turn in the direction of the weaker motor.
• Battery Issues: Low or uneven battery levels can affect performance and cause erratic movement.

How to Fix a Hoverboard That Only Goes in Circles

1. Recalibrate Your Hoverboard

Recalibration is often the quickest fix. Here's how to do it:

1. Turn off the hoverboard and place it on a flat, level surface.
2. Press and hold the power button for about 10 seconds until you hear a beep or see lights flashing.
3. Release the button and wait for the hoverboard to reset.
4. Turn it back on and test if the issue is resolved.

2. Check Tire Pressure

Uneven tire pressure can cause imbalance. Use a pressure gauge to ensure both tires are inflated equally. Refer to your hoverboard's manual for the recommended PSI.

3. Inspect the Gyroscope

If recalibration doesn't work, the gyroscope might be faulty. Open the hoverboard (if possible) and check for loose connections or visible damage. If you're not comfortable doing this, consult a professional.

4. Test the Motors

Spin each wheel manually to see if one feels stiffer than the other. If one motor isn't responding correctly, it may need repair or replacement.

5. Charge the Battery Fully

Low battery levels can cause erratic behavior. Charge your hoverboard fully before testing again.

Preventing Future Issues

To avoid your hoverboard going in circles again, follow these tips:

• Regularly recalibrate your hoverboard, especially after heavy use.
• Keep tires properly inflated and check them monthly.
• Avoid riding on uneven or rough surfaces that could damage the gyroscope.
• Store your hoverboard in a dry, temperature-controlled environment.

When to Seek Professional Help

If you've tried all the fixes above and your hoverboard still won't go straight, it's time to take it to a repair shop. Persistent issues could indicate deeper electrical or mechanical problems that require expert attention.

Don't let a hoverboard that only goes in circles ruin your ride. With the right troubleshooting steps, you can get back to gliding smoothly in no time. Whether it's a quick recalibration or a motor replacement, fixing the issue is often simpler than you think. Now, go out there and enjoy your hoverboard the way it was meant to be ridden—straight and steady!