How to Fix a Hoverboard That Got Wet: A Step-by-Step Guide

Water and electronics don't mix, but accidents happen. If your hoverboard took an unexpected dive into a puddle or got caught in the rain, don't assume it's a lost cause. With the right steps, you might be able to bring it back to life. Here's how to fix a hoverboard that got wet and prevent further damage.

Step 1: Power It Down Immediately

The moment your hoverboard gets wet, turn it off and unplug it if it's charging. Continuing to use it while wet can cause a short circuit, leading to permanent damage or even a fire hazard. Press and hold the power button until the device shuts down completely.

Step 2: Remove the Battery (If Possible)

If your hoverboard has a removable battery, take it out carefully. This prevents any residual electricity from causing corrosion or further damage. If the battery is sealed inside, skip this step and proceed to drying.

Step 3: Disassemble the Hoverboard

Use a screwdriver to open the hoverboard's casing. Remove the outer shell to expose the internal components. Be gentle to avoid damaging any wires or circuits. Place the screws in a safe spot so you don't lose them.

Step 4: Dry the Components

Use a soft, dry cloth to wipe away any visible moisture. Avoid using a hairdryer, as the heat can damage sensitive parts. Instead, place the hoverboard in a dry, well-ventilated area or near a fan. For better results, use silica gel packets or uncooked rice to absorb moisture from hard-to-reach areas.

Step 5: Check for Corrosion

Inspect the circuit board and battery terminals for signs of corrosion (white or greenish deposits). If you spot any, use a cotton swab dipped in isopropyl alcohol to gently clean the affected areas. Let it dry completely before reassembling.

Step 6: Reassemble and Test

Once everything is dry, put the hoverboard back together. Reinsert the battery (if removed) and turn it on. If it doesn't power up, try charging it for a few minutes. If it still doesn't work, the damage may be irreversible, and you might need professional help.

Preventing Future Water Damage

To avoid this situation in the future, keep your hoverboard away from water. If you must ride in damp conditions, consider using a waterproof cover or purchasing a hoverboard designed for wet environments.

Don't let a little water ruin your fun! By acting quickly and following these steps, you can often save your hoverboard from permanent damage. Now, get back to riding with confidence—just watch out for puddles next time!