How to Get Water Out of a Hoverboard: A Step-by-Step Guide

Water and hoverboards don’t mix—but accidents happen. Whether your hoverboard took an unexpected dip in a puddle or got caught in the rain, knowing how to get water out of a hoverboard can save you from costly repairs or replacements. This step-by-step guide will walk you through the safest and most effective methods to dry out your hoverboard and get it back in working order.

Why Water Damage Is Dangerous for Hoverboards

Hoverboards rely on sensitive electronic components, including batteries, motors, and circuit boards. When water seeps into these parts, it can cause short circuits, corrosion, or even permanent damage. Ignoring water exposure can lead to malfunctioning controls, reduced battery life, or complete failure. Acting quickly is key to minimizing damage.

Step 1: Power Off Immediately

If your hoverboard is still on when it gets wet, turn it off immediately. Continuing to use a water-damaged hoverboard can worsen the damage. Unplug it from any chargers and avoid pressing any buttons to prevent electrical shorts.

Step 2: Disassemble the Hoverboard (If Possible)

Carefully open the hoverboard’s casing to access the internal components. Use a screwdriver to remove the screws, but be gentle to avoid damaging the housing. If you’re unsure how to disassemble your model, refer to the manufacturer’s manual or seek professional help.

Step 3: Remove Excess Water

Gently shake the hoverboard to dislodge any pooled water. Use a dry microfiber cloth or paper towels to soak up visible moisture from the surface. Avoid rubbing, as this can push water deeper into the components.

Step 4: Use a Desiccant or Silica Gel

Place the hoverboard in a large container or bag filled with silica gel packets, uncooked rice, or another moisture-absorbing desiccant. These materials will help draw out residual water. Leave it sealed for at least 24–48 hours.

Step 5: Let It Air Dry

After removing excess moisture, leave the hoverboard in a dry, well-ventilated area for several days. Avoid using heat sources like hairdryers, as high temperatures can damage electronics. A fan can help circulate air and speed up drying.

Step 6: Check for Corrosion

Once the hoverboard is completely dry, inspect the internal components for signs of corrosion or rust. If you spot any, use a small brush or cotton swab dipped in isopropyl alcohol to clean the affected areas gently.

Step 7: Reassemble and Test

Carefully put the hoverboard back together and power it on. Test all functions, including the balance sensors, lights, and motors. If it doesn’t work properly, consult a professional repair service.

Preventing Future Water Damage

To avoid repeat incidents, keep your hoverboard away from water sources. Consider purchasing a waterproof cover or storing it indoors during wet weather. Regular maintenance checks can also help catch early signs of damage.

Don’t let a little water ruin your hoverboard fun! With these steps, you can rescue your device and get back to gliding smoothly. Remember, acting fast and following proper drying techniques are the keys to success.