How to Reset a Hoverboard That Won't Turn On: A Step-by-Step Guide

Few things are as frustrating as a hoverboard that refuses to turn on. Whether you rely on it for fun or commuting, a dead hoverboard can put a damper on your plans. But before you give up and buy a new one, try resetting it. This guide will walk you through the process step by step, helping you troubleshoot and revive your hoverboard.

Why Won't Your Hoverboard Turn On?

Before attempting a reset, it's important to understand why your hoverboard isn't powering up. Common causes include:

• Dead battery – The most common issue. If the battery is completely drained, the hoverboard won't respond.
• Faulty charger – A damaged charger may not provide enough power to the battery.
• Loose wiring – Internal connections may have come undone.
• Overheating – Some hoverboards shut down as a safety measure if they overheat.
• Software glitch – A firmware issue may require a reset.

Step 1: Check the Battery

Start by ensuring the battery has enough charge:

1. Plug the charger into a working outlet and connect it to the hoverboard.
2. Wait at least 30 minutes before attempting to turn it on.
3. If the hoverboard still doesn't respond, try a different charger if possible.

Step 2: Perform a Hard Reset

If the battery isn't the issue, a hard reset might help:

1. Turn off the hoverboard (if possible).
2. Locate the reset button, usually found near the charging port or under the footpad.
3. Press and hold the reset button for 10-15 seconds.
4. Release the button and wait a few seconds before turning the hoverboard on again.

Step 3: Inspect Internal Wiring

If the reset doesn't work, there may be a loose connection inside:

1. Use a screwdriver to carefully open the hoverboard's casing.
2. Check for any disconnected wires or visible damage.
3. Reconnect any loose wires and ensure all connections are secure.
4. Close the casing and test the hoverboard again.

Step 4: Update Firmware (If Applicable)

Some hoverboards require firmware updates to function properly:

1. Check the manufacturer's website for firmware updates.
2. Download the update file and follow the instructions to install it.
3. Restart the hoverboard after the update completes.

Preventive Measures to Avoid Future Issues

To keep your hoverboard running smoothly:

• Charge it regularly, even when not in use.
• Avoid leaving it in extreme temperatures.
• Store it in a dry place to prevent moisture damage.
• Clean the wheels and sensors periodically.

Don't let a non-responsive hoverboard ruin your day. With these troubleshooting steps, you can often bring it back to life without professional help. If all else fails, consult a technician, but in most cases, a simple reset or battery check does the trick!